Verify Account

SYLLABUS

 Unit-1:

Introduction Objective of structural design-Steps in RCC Structural Design Process- Type of Loads on Structures and Load combinations- Code of practices and Specifications - Concept of Working Stress Method, Ultimate Load Design and Limit State Design Methods for RCC –Properties of Concrete and Reinforcing Steel - Analysis and Design of Singly reinforced Rectangular beams by working stress method - Limit State philosophy as detailed in IS code - Advantages of Limit State Method over other methods - Analysis and design of singly and doubly reinforced rectangular beams by Limit State Method.

Unit-2:

Design of Beams Analysis and design of Flanged beams for – Use of design aids for Flexure - Behaviour of RC members in Shear, Bond and Anchorage - Design requirements as per current code - Behaviour of rectangular RC beams in shear and torsion - Design of RC members for combined Bending, Shear and Torsion.

Unit-3:

Design Of Slabs and Staircase Analysis and design of cantilever, one way simply supported and continuous slabs and supporting beams-Two way slab- Desingn of simply supported and continuous slabs using IS code coefficients- Types of Staircases – Design of dog-legged Staircase.

Unit-4:

Design of Columns Types of columns –Axially Loaded columns – Design of short Rectangula Square and circular columns –Design of Slender columns- Design for Uniaxial and Biaxial bending using Column Curves

Unit-5:

Design of Footings Concepts of Proportioning footings and foundations based on soil properties-Design of wall footing – Design of axially and eccentrically loaded Square, Rectangular pad and sloped footings – Design of Combined Rectangular footing for two columns only